PondWorld has a NEW Facebook page Follow PondWorld on our NEW Facebook page


PondWorld is proud to be an OASE Authorized Web Retailer

Pond Winterization
Browse Categories
Pondworld.com Learning Center
Browse by Manufacturer

"Great service and EXCELLENT packaging, after a couple of years buying from various websites I believe I have found my pond supplier!"
-Laurie C., California

"I just had the pleasure of placing an order with your company.Cathy was an absolute jewel - she was patient, knowledgeable and extremely helpful in helping me select the appropriate items for my needs. It has been a true pleasure doing business with you."
Scotty D., South Carolina

Firestone Bonding Adhesive-5 Gallons

Firestone Bonding Adhesive-5 Gallons
Price: $199.00
Item Number: W563587052
Manufacturer: Firestone Specialty Products
Manufacturer Part No: W563587052

Firestone Bonding Adhesive-5 Gallons

Firestone Bonding Adhesive is designed for bonding Firestone PondGard EPDM Pond Liner and Firestone 45 mil EPDM Pond Liner to wood, metal, masonry and other acceptable substrates.

This pond liner adhesive requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select

Pond Liner Adhesive: Firestone Bonding Adhesive Method of Application

Surfaces on or against which Firestone Bonding Adhesive is to be applied must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary before using this pond liner adhesive.

You must stir the Firestone Bonding Adhesive thoroughly before and during use, achieving a uniform mix with no sediment on the bottom and no marbling evident. Apply this pond liner adhesive with a solvent resistant paint roller. To allow approximately the same flash off time, be sure to roll the underside of the EPDM pond liner and the substrate to which it will be adhered one right after the other. Apply the pond liner adhesive evenly to avoid globs and puddles of adhesive. You can also spray-apply the pond liner adhesive if you follow it by rolling to ensure 100% coverage. Care must be taken not to apply Bonding Adhesive over any area that is to be later cleaned and spliced to another sheet or flashing.

Allow the Firestone Bonding Adhesive to flash off completely according to the touch-push test (usually less than 15 minutes, flash off time will vary depending on ambient air conditions).

Starting at the fold, roll the previously coated portion of the EPDM pond liner into the coated substrate slowly and evenly so as to minimize wrinkles. To ensure proper contact, compress the bonded half of the EPDM pond liner to the substrate with a stiff broom using heavy pressure.

Pond Liner Adhesive: Firestone Bonding Adhesive Coverage Rate

Depending on the substrate, approximately 45-60 square feet per gallon may be obtained from this pond liner adhesive. Some surfaces are more uneven and porous and will result in lower cover rate while smooth, while non-porous surfaces may result in higher coverage rates. Rates are based on roller application to both mating surfaces. When sprayed and back-rolled, the coverage rate may be slightly higher than when rolled only.

Product Reviews

Rate This Product:
or Create a Review
(0 Ratings, 0 Reviews)